Glasgow & surrounding areas

Dishwasher Repair in Glasgow

Not draining, leaving dishes dirty, leaking or not heating. All makes and models. Same or next day appointments where available.

Call 07446 966681 Get a quote online

Get a quote online

3 quick steps. Start with your postcode.

Dishwasher Repair across Glasgow

A dishwasher that leaves dishes dirty, sits in standing water or leaks onto the kitchen floor can almost always be traced to a small number of components, such as the pump, filters, spray arms, door seal or heating element.

We repair freestanding, integrated and slimline dishwashers. Give us the make, model and what the dishwasher is doing and we'll arrange an engineer.

Common dishwasher faults

Not draining

Blocked filters, a clogged drain hose or a failed drain pump leave water sitting in the bottom of the machine.

Dishes not coming clean

Blocked spray arms, dirty filters, low water inlet or a failed circulation pump reduce wash performance.

Leaking

Door seals, worn hoses, a cracked sump or an overfilling valve can all cause leaks.

Not heating or drying

A failed heating element, thermostat or sensor will leave dishes cold and wet.

Door won't latch or close

Broken door latches, hinges or door switches will stop a cycle from starting.

Error codes

Fault codes point to the sensor, pump, inlet or board that needs attention.

What to check before you call

  • Switch off at the socket before checking anything.
  • Clean the base filter and check spray arm holes for blockages.
  • Use dishwasher salt and rinse aid correctly, especially in hard-water areas.
  • Run a hot cleaning cycle with a dishwasher cleaner if the machine smells or leaves residue.

Repair or replace?

Dishwasher faults like pumps, seals, latches and heaters are routine repairs. Integrated machines are a hassle to replace, so repair is often the sensible first step.

How it works

  1. Tell us the fault

    Call us or send the form with the appliance, make and what it's doing.

  2. We arrange an engineer

    We match you with an engineer covering your postcode and agree a suitable visit time.

  3. Diagnosed and repaired

    The engineer diagnoses the fault and explains the repair before work starts. Many repairs can be completed on the visit if parts are available.

Dishwasher Repair FAQs

Why is my dishwasher not draining?

Usually a blocked filter or drain hose, or a failed drain pump. Check the filter first; if that's clear, an engineer can test the pump.

Can you repair integrated dishwashers?

Yes. Integrated dishwashers are repaired in situ wherever possible, so you don't need to pull the machine out of the kitchen units first.

Why are my dishes still dirty after a wash?

Blocked spray arms or filters, low water pressure or a failing circulation pump are the usual causes. Hard water and low salt can also play a part.

Do you repair all dishwasher brands?

Yes, including Bosch, Siemens, Neff, Miele, Beko, Indesit, Hotpoint, Zanussi, AEG, Samsung and more.

Other appliances we repair

Need a repair? Speak to us today.

Tell us the appliance and the fault and we'll arrange an engineer.

Call 07446 966681 Get a quote online

Call nowGet a quote